Biodiesel production equipment plant, 1 t/day (automatic), vegetable oil

High-class equipment from one of the best European manufacturers. Reliable, technologically advanced, at a reasonable price, significantly lower than competitors.

CTS equipment, 1 t/shift, for the production of biodiesel from any vegetable oil - sunflower, rapeseed, cottonseed, coconut, etc.

Unlike companies producing equipment for the production of biodiesel based on old, "barrel" technologies used in the last century, our company uses the principle of magnetic pulse high-frequency cavitation, used in secret technologies, which allows achieving significant advantages:

Undemanding to the quality of the original oil
High-frequency magnetic pulse cavitation reactors operate successfully and stably, both on raw and refined oil, as well as all types of animal fats and their mixtures with vegetable oils. These are sunflower, rapeseed, flax, palm, mustard, etc., with almost any acid number, as well as waste from fried oil from restaurants and bakeries, beef, pork and chicken fats - waste from livestock and poultry processing plants.

Passing the reaction "in one pass"
In magnetic pulse cavitation technology, there is no need to carry out a repeated transesterification reaction, as in old "barrel" technologies.

The time for obtaining finished biodiesel is reduced by 8-10 times.
No need for cleaning with sorbents, washing and drying of biodiesel.
Minimum amount of alcohol and catalyst. No alcohol recovery.

During cavitation treatment, there is no need to heat the oil, and as a result - energy savings of 5-7 times.

Low-temperature reaction at room temperature.

Magnetic pulse high-frequency cavitation treatment in the reactor occurs at the molecular level. All components are exposed to pulses of magnetically directed cavitation.
Minimum overall dimensions of the modules are 5-10 times smaller than traditional complexes of similar capacity.

Biodiesel from vegetable oil.

BNR 250 unit (250-300 liters per hour) automatic

The BNR250 automatic system consists of:

PPS-CT 1200: electronic system for preliminary dosing and processing of initial products.

ROTON-B 7 - magnetic pulse reactor for BNR 250.
Automatic control system (electric cabinet, PLC, PC, software, etc.)
Pipes, fittings, etc.

Separation system:
6.1. Separation tank, sensors, pump, valves, etc.

7.2. Electronic monitoring system for filling, separation and unloading of finished products

Technical parameters:

Productivity, liter per hour 250-300

Nominal power, kW 11

Weight (approximately), kg 540

Degree of automation full

Operating mode continuous

Processing capacity, kW h / liter (no more than) 0.028

Capacity adjustment yes

Area occupied by one module, m2 2.7

Overall dimensions (L x W x H), mm 2250x1390x1610

For the production of BioST, we cooperate only with reliable and well-known global suppliers such as Grundfos, Siemens, Schneider Electric, Moeller, Fanuc, etc.

All BioST mechanisms are ATEX certified, which ensures safe operation of the unit with liquids such as methanol and catalyst.

BioST are designed for continuous operation for 24 hours and do not require special maintenance.